一、壓路機型號

　　1、 Roller model

　　1、根據操作重量區分：微型（1噸以下）；小型（1-6噸）；中型（6-10噸），重型（10-14噸）；超重型（16噸以上）

　　1. According to the weight of the operation: micro (less than 1 ton); Small (1-6 tons); Medium (6-10 tons), heavy (10-14 tons); Heavy duty (over 16 tons)

　　2、按壓輪區分：單鋼輪、雙鋼輪、三光輪、輪胎

　　2. Pressing wheel differentiation: single steel wheel, double steel wheel, three wheel, tire

　　3、按壓實原理分：振動壓路機、靜作用壓路機、弗擊壓路機、組合壓路機

　　3. According to the compaction principle, it can be divided into vibratory roller, static action roller, vibratory roller, and combination roller

　　二、型號解釋

　　2、 Model Explanation

　　1、靜壓式壓路機：各種壓實作業，使被碾壓層產生永久變形而密實。又分鋼輪式和輪胎式兩類。碾輪構造有光碾、槽碾和羊足碾等。光碾應用最普遍，主要用于路面；

　　1. Static pressure roller: Various compaction operations that cause permanent deformation and compaction of the compacted layer. It is divided into two types: steel wheel type and tire type. The roller structure includes light rollers, groove rollers, and sheep foot rollers. Smooth grinding is the most common application, mainly used for road surfaces;

　　2、震動壓路機：面面層壓實。采用機械或液壓傳動，能集中力量壓實突起部分，壓實平整度高，適于瀝青路面壓實作業。

　　2. Vibration roller: compacting the surface layer. Using mechanical or hydraulic transmission, it can concentrate strength to compact protruding parts, with high compaction smoothness, suitable for asphalt pavement compaction operations.

　　3、鋼輪式壓路機：其主要技術參數是機重和線壓力。80年代各種鋼輪式壓路機機重范圍約為:兩輪壓路機2～13噸，三輪壓路機1～15噸，按需要可加壓重1～3噸,三軸三輪壓路機13～14噸，加壓重后為18～19噸。碾輪采用充氣輪胎,一般裝前輪3～5個，后輪4～6個。

　　3. Steel wheel roller: Its main technical parameters are machine weight and line pressure. In the 1980s, the weight range of various steel wheeled road rollers was approximately 2-13 tons for two wheeled road rollers, 1-15 tons for three wheeled road rollers, and 1-3 tons for pressurized weight as needed. For three-axis three wheeled road rollers, the weight range was 13-14 tons, and after pressurized weight, it was 18-19 tons. The grinding wheel adopts inflatable tires, usually equipped with 3-5 front wheels and 4-6 rear wheels.

　　4、輪胎式壓路機：接地壓力，壓力調節范圍為0.11～1.05兆帕。輪胎式壓路機采用液壓、液力或機械傳動系統，單軸或全軸驅動，寬基輪胎鉸接式車架結構三點支承。壓實過程有揉搓作用，使壓實層顆粒不破壞而相嵌，均勻密實。機動性好，行速快（可達25公里/時）,用于道路、飛機場等工程墊層的壓實。

　　4. Tire roller: Ground pressure, pressure adjustment range is 0.11-1.05 megapascals. The tire roller adopts a hydraulic, hydraulic or mechanical transmission system, single axis or full axis drive, and a wide base tire articulated frame structure with three-point support. The compaction process has a kneading effect, which ensures that the particles in the compacted layer are not damaged and are evenly compacted. Good maneuverability and fast travel speed (up to 25 kilometers per hour), used for compacting cushion layers in roads, airports, and other engineering projects.

　　5、拖式振動壓路機：可以有效地壓實各類土壤及巖石填方，適用于現代高速公路、機場、路堤填方、海港、堤壩、鐵路、礦山等工程建設施工。

　　5. Trailing vibratory roller: can effectively compact various types of soil and rock fill, suitable for modern highway, airport, embankment fill, harbor, dam, railway, mining and other engineering construction.

　　本文由  濟南壓路機租賃 友情奉獻.更多有關的知識請點擊  http://ywsun168.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Roller Rental For more related knowledge, please click http://ywsun168.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned