水穩料（水泥穩定碎石材料）與瀝青料（瀝青混合料）是道路建設中常用的兩種材料，它們在成分、性能、施工工藝和應用場景等方面存在明顯區別，以下是主要差異：1. 成分與性質

　　Water stabilized aggregate (cement stabilized crushed stone material) and asphalt aggregate (asphalt mixture) are two commonly used materials in road construction. They have significant differences in composition, performance, construction technology, and application scenarios. The following are the main differences: 1 Composition and Properties

　　· 水穩料：主要由水泥、級配碎石（或礫石）和水按特定比例混合而成，屬于半剛性材料。水泥作為膠結材料，將碎石顆粒粘結在一起，形成具有一定強度和穩定性的板體結構。

　　·Water stable material: mainly composed of cement, graded crushed stone (or gravel), and water mixed in a specific proportion, belonging to semi-rigid materials. Cement, as a bonding material, binds crushed stone particles together to form a plate structure with certain strength and stability.

　　· 瀝青料：由瀝青（通常為石油提煉的黑色膠狀物質）與粗集料（如碎石）、細集料（如砂）、礦粉等按一定比例混合而成，屬于粘彈性材料。瀝青在不同溫度和荷載作用下表現出不同的力學特性，具有較好的柔韌性和抗變形能力。2. 性能特點

　　·Asphalt material: It is a viscoelastic material made by mixing asphalt (usually a black gelatinous substance extracted from petroleum) with coarse aggregates (such as crushed stone), fine aggregates (such as sand), mineral powder, etc. in a certain proportion. Asphalt exhibits different mechanical properties under different temperatures and loads, with good flexibility and deformation resistance. 2. Performance characteristics

　　· 水穩料：

　　·Water stable material:

　　· 強度高：能承受較大的荷載壓力，為上層路面提供穩固支撐，尤其適合重載交通道路。

　　·High strength: able to withstand large load pressures, providing stable support for the upper pavement, especially suitable for heavy-duty traffic roads.

　　· 穩定性好：具有較好的水穩定性和抗凍性，能在潮濕或寒冷環境下保持性能穩定。

　　·Good stability: It has good water stability and frost resistance, and can maintain stable performance in humid or cold environments.

　　· 剛性較大：表面相對粗糙，直接行車會導致顛簸和輪胎磨損，需鋪設瀝青面層進行保護。

　　·High rigidity: The surface is relatively rough, and direct driving can cause bumps and tire wear, requiring the laying of asphalt surface layer for protection.

　　· 瀝青料：

　　·Asphalt material:

　　· 柔韌性好：能適應路面的微小變形，減少裂縫產生，提高路面的耐久性。

　　·Good flexibility: able to adapt to small deformations of the road surface, reduce the occurrence of cracks, and improve the durability of the road surface.

　　· 平整度高：施工后表面光滑，行車舒適性好，能有效降低噪音和輪胎磨損。

　　·High flatness: The surface is smooth after construction, providing good driving comfort and effectively reducing noise and tire wear.

　　· 防水性能好：致密的結構可防止水分滲透，保護下層水穩層不受水損害。3. 施工工藝

　　·Good waterproof performance: The dense structure can prevent water infiltration and protect the lower water stable layer from water damage. 3. Construction technology

　　· 水穩料：

　　·Water stable material:

　　· 施工時需嚴格控制水泥用量、碎石級配和含水量，確?；旌狭暇鶆蛐浴?/p>

　　·During construction, it is necessary to strictly control the amount of cement, gravel grading, and moisture content to ensure the uniformity of the mixture.

　　· 攤鋪后需及時進行壓實，壓實度要求較高（一般需達96%以上），且需在水泥初凝前完成施工。

　　·After paving, it is necessary to compact it in a timely manner, with a high degree of compaction requirement (generally above 96%), and the construction should be completed before the initial setting of the cement.

　　· 施工完成后需進行養護，保持表面濕潤，防止干縮裂縫產生。

　　·After construction is completed, maintenance should be carried out to keep the surface moist and prevent the occurrence of shrinkage cracks.

　　· 瀝青料：

　　·Asphalt material:

　　· 施工前需將瀝青加熱至合適溫度（通常160℃-180℃），以保證其流動性。

　　·Before construction, the asphalt needs to be heated to a suitable temperature (usually 160 ℃ -180 ℃) to ensure its fluidity.

　　· 攤鋪時需使用加熱的熨平板，確保瀝青混合料均勻鋪設，形成平整的路面。

　　·When paving, a heated ironing board should be used to ensure that the asphalt mixture is evenly spread and forms a smooth road surface.

　　· 壓實是關鍵環節，需在瀝青溫度較高時進行，以達到設計的壓實度和孔隙率。4. 應用場景

　　·Compaction is a critical step that needs to be carried out when the asphalt temperature is high to achieve the designed compaction degree and porosity. 4. Application Scenarios

　　· 水穩料：主要用于道路基層施工，作為道路的承重層，為上層路面提供穩定支撐，適用于各種等級的道路，尤其適合重載交通、多雨或寒冷地區的道路基層。

　　·Water stable material: mainly used for road base construction, as the load-bearing layer of the road, providing stable support for the upper pavement, suitable for various grades of roads, especially for road base in heavy traffic, rainy or cold areas.

　　· 瀝青料：主要用于道路面層施工，直接承受車輛荷載和環境作用，適用于對平整度、舒適性和防水性能要求較高的道路面層，如高速公路、城市主干道等?？偨Y(jié)來說，水穩料和瀝青料在道路建設中相互配合，水穩料提供強度和穩定性，瀝青料提供平整度和耐久性，共同構成完整的道路結構體系。

　　·Asphalt material: mainly used for road surface construction, directly bearing vehicle loads and environmental effects, suitable for road surface layers with high requirements for flatness, comfort, and waterproof performance, such as highways, urban main roads, etc. In summary, water stable materials and asphalt materials complement each other in road construction. Water stable materials provide strength and stability, while asphalt materials provide smoothness and durability, together forming a complete road structural system.

　　本文由  濟南水穩料 友情奉獻.更多有關的知識請點擊  http://ywsun168.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is contributed by Jinan Water Stable Material Friendship For more related knowledge, please click http://ywsun168.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned